T piece to 12mm hose
for an on board air system

Push-in fittings for pneumatics

Used for a quick and simple connection between any 2 components like air tank to nitto outlets or tank to tank. We don't recommend using them from the air compressor due to the high heat generated

Pneumatic push-in fittings are the standard on the pneumatic fittings market and are very widely used. What sets them apart is the easy release function for the tube, i.e. by pressing a releasing ring. These fittings are used with the standard O.D. tubing that is commonly available on the market.

Specifications

  • Working environment: 0-10 bar/0 to 145 PSI. Working temperature: 0-60°C. Applicable hose: PU/nylon/PE
  • These fittings are made of high-quality plastic/polyurethane, durable and without air leakage for long-term use. Built-in stainless steel locking claw and NBR O-ring
  • Easy to install: no additional sealing is required, just a simple push to connect . Elliptical release rings at both ends making it easy to disassemble without additional tools.
  • Highly recommend using a hose cutter as end of hose must be cut square to have a perfect seal

Other pneumatics push-in fittings are also available, inlcuding our Joiner for 12mm hose , 1/4 BSP Female to 12mm hose and 1/4 BSP male to 12mm hose.

Length: 50mm Width: 20mm Height: 20mm

SKU FT033
Brand AOB4x4
Shipping Weight 0.0250kg
Shipping Width 0.020m
Shipping Height 0.020m
Shipping Length 0.050m
Shipping Cubic 0.000028000m3

Others Also Bought

Recommended Products

What our Customers are Saying


Be The First To Review This Product!

Help other AOB4x4 users shop smarter by writing reviews for products you have purchased.

Write a product review